Twincam Front Wheel On A 94 Evo Flht

[JOECAPY]

I'm Trying To Match My Bike Wheel To My Sidecar Wheel.has Any One Installed A Twincam 2002 9 Spoke Front Wheel On A Pre 2000 Evo. It Seems The Rotors Would Fit And You Can Use 3/4" Sealed Wheel Bearings, So The 3/4" Axle Would Work. The Only Issues I Can See Are The Speedo And Maby The Axle Spacers. Any Feedback Would Be Great.

[frisco-rigid]

Hey Joe

If the wheels are the same i.e. both 21" or 19" etc. you should have no prob even with the speedo.. If they're diff you'll have to check and see which speedo spacer/unit and speedo you may have to change to..
The speedo prob can be a pain..

Then..
Since they're both 3/4" bearings, heck, just space it and go baby.. Hey,, you might have to improvise or buy new spacers,,, big deal..

The wheels are just wheels,, they will fit anything at all even other sickles with 3/4" axels..
The little probs like speedo ratios and senders and spacing for calipers/rotors can get a wee bit frustrating BUT certainly Not in-surmountable..
If I can do it you can do it..