bike stalls at stop
Harley EFI & Harley CarbDiscuss bike stalls at stop in the Harley Tech & Harley How-to forums; Hi: I had the same problem and I found that the spark plug gap was very large....
Location: Winston Salem, Greensboro area of North Carolina
Posts: 125
Re: bike stalls at stop
Quote:
Originally Posted by jp13
It stalls when I am actualy stopped you can feel it quitting. Normaly my rpms are around 1k all the time. I ride 07 dyna, EFI , rode 350 miles yesterday with no problems. Go figure.
Since it acts up intermittently, and doesn't set a code, I would think the idle stepper motor is sticking. It may have build up around the plunger.
Remove the air filter. Look for the idle hole that's located in the upper area of the throttle body on this side of the throttle plate. Spray some carb. cleaner in the hole several times, letting it sit and soak in between sprays, then start the engine and spray in the hole again. You will have to open the throttle to keep it running. This may not be the problem, but it is an inexpensive fix if it does work. Good luck.
Since it acts up intermittently, and doesn't set a code, I would think the idle stepper motor is sticking. It may have build up around the plunger.
Remove the air filter. Look for the idle hole that's located in the upper area of the throttle body on this side of the throttle plate. Spray some carb. cleaner in the hole several times, letting it sit and soak in between sprays, then start the engine and spray in the hole again. You will have to open the throttle to keep it running. This may not be the problem, but it is an inexpensive fix if it does work. Good luck.
Thanks, I will try this also and yes it sure would be a cheap fix. Thanks again.
__________________ 07 lowrider
rinehart exhaust
bonekeeper custom tank
alot of chrome
Re: bike stalls at stop 
Linear Mode
