Replacing front engine mount in 06 Road King Harley Engine Discuss Replacing front engine mount in 06 Road King in the Harley Tech & Harley How-to forums; Hey all Hope everyone here had a safe season. Too short as always. I haven't been on line much since June. You'll love this, I somehow managed to take power ...

[03fxst]

Hey all
Hope everyone here had a safe season. Too short as always. I haven't been on line much since June. You'll love this, I somehow managed to take power out of my bike with that Mikuni 45. Lost ponies and foot pounds, go figure. I'll post on that later to see what you think. First a friend asked if I would replace the front motor mount on his 2006 Road King before he stores it. Apparently there was a service bulletin on it. Looks simple enough. Remove the voltage regulator. Level the bike, support the engine. Take off the old mount and install the new one. Am I missing anything that could get us in trouble. I don't like to work on anyone else's bike. But, when a friend asks for help, you help.

Back on line and back in the garage..
03FXST

[PeterV]

That's pretty well it.
You'll be jacking up the motor, as far up as it will go. Not much room to pop the rubber mount, a little prying with a big flathead will get it done.
Make sure you install the new mount right side up.