cam bearing came apart 1 pin fell in Harley Evo Discuss cam bearing came apart 1 pin fell in in the Motorcycles forums; replaceing cam lifters lifter blocks and cam bearing had trouble removeing cam bearing and all the little rollers fell out 1 went inside turn the motor by hand (and also ...

[AK_SLIMER]

replaceing cam lifters lifter blocks and cam bearing had trouble removeing cam bearing and all the little rollers fell out 1 went inside turn the motor by hand (and also replaceing rings so heads pistons and barrels removed) and you can hear it rub a little turned motor upside down sideways hear it move around but does not fall out so i have to split case or can i just leave it its so small and nothing really for it to get stuck in is there, want to put it back togather not take more apart

[frisco-rigid]

Hi AK

Jeeeze man, I hope I never have to deal with this prob..

I would not leave it in the motor.. Have you tried a tiny extendable magnet.?

Do you know where it has ended up with all your side-ways and up-side downs.?

[JCourneyaP]

Ak. You wanna get that bearing out of there. If that bearing migrates to the wrong spot. I would try the magnet first. If you can hear it moving you should be able to stick it. If that fails I would split the cases and get it out.

[AK_SLIMER]

been 3 days used 3 magnets filled with oil poured it out filled it with gas and turned crank poured it out and dried it with air till dry and thats when i can hear it move thanks for replies im gona split case

thanks kevin