Old school bike shop

[aceharleywrench]

All interested AIM Forum readers,
Buzz gave me the green light a while back to plug our new shop on the forum so here goes:
The name of the shop is Suits Me Cycle,we are located at 361 Bogden Rd.Broadalbin NY 12025 Phone518)842-6697.We are approximately 30 miles north of Albany NY right off Rt. 29 at the tip of the Great Sacandaga lake.The scenery & roads around here make it a worthwhile ride even if you dont need service on your scoot.
Heres what we have to offer:Two full time factory PHD certified technicians with over 50 years of H-D experience between us,my partner is also Honda factory certified,while I am H-D,Buell,Triumph,Ducati & Yamaha factory certified.As you can see,we have most of the bases covered.
We are set up with all the major parts distributors and we offer machine shop services.We are a registered New York State motorcycle inspection station too.
Our labor rate is an economical 45.00/hr and we are open 6 days a week to serve the needs of the motoring public.
Our web site is currently under development,I will post more on that when it's up & running.
Thanks for taking the time to read this & I hope we can be of service to you.

[HarleyCruiser]

ACE, sure wish you were closer. Good luck with the new venture, I think Wright turn just opened up his new shop in Orlando.
You need to add your shop information in your signature so every time you post it will show up.
Anyone who come in here and shares as much good advice as you do needs to be rewarded.
That is what the signature is for.
Buzz is great for allowing web address and links, and shop information, he feels they make the forum better and I agree.

[aceharleywrench]

Thank you Harleycruiser,I will modify my signature accordingly.This whole computer thing gets a little overwhelming with all the features that are available.
Buzz is da man!
Wrightturn,best of luck to you & your new shop!

[Hammerhead Pat]

Good luck with the new shop! There's a guy around here that was working for a stealership and went out on his own and opened his own shop, $50 hr flat rate. Good for you guys

[tommyglide]

Good for you Ace, I wish you every success. Obviously you've worked hard at your craft to be certified in those various disiplines The rates up here are usually more than double what you charge so I may just have to go a wee bit out of my way for a spring tune up, eh?

[evoKENevo]

ACE & WRIGHT
Best of luck...you've both been a valuable asset here...and honest,etc !!!

[aceharleywrench]

Originally Posted by tommyglide

Good for you Ace, I wish you every success. Obviously you've worked hard at your craft to be certified in those various disiplines The rates up here are usually more than double what you charge so I may just have to go a wee bit out of my way for a spring tune up, eh?

Love to have you for a customer,plus it would be nice to put a face with the name!
Evo,thank you very much.

[street bob]

Good luck Ace.........Treat people right and your business will be a success!
Good luck to you also Write.......
Hope both you guys prosper and grow.

[tommyglide]

evoKen, you are always bustin my chops.................assest? (finally my turn)

[evoKENevo]

Assest ? What assest ?? I don' see no steenk'n assest..........

Besides..if you're going to LOOK for ANY little flaw or typo try bust'n (not bustin) MY chops....eh !?!

Meanwhile, I think we've hi-jacked this thread long enough...and (uhhh) don't go back to edit/correct your mistake...that'd be cheating !!!