Clutching Harley, Clutching Victory

317-36-09 BarnettBarnett has a line of stock length and custom length cables for all Harley-Davidson and Victory models in addition to custom length and one-off cables for any handlebar conversion or custom bike application. The cables are available in four casing types: traditional black vinyl, classic stainless braid, Platinum Series bright silver-plated braid, and Stealth Series black for Harleys only. All braided cables have a protective clearcoat that will not become discolored from sun exposure. All 1987 and later Harley-Davidson clutch cables along with all Victory clutch cables come standard with high-efficiency, nylon-coated, silicone-lubed inner wire for a smooth pull and reduced lever effort. All equipment is made and assembled in the US. Info: Barnett Tool and Engineering, 805/642-9435, BarnettClutches.com.

Pop The Clutch With Barnett Motorcycle Clutch Tools

Barnett-clutch-coverFrom diaphragm spring compression tools to clutch lock plates that assist in removing inner hubs, Barnett clutch tools make clutch replacement and maintenance a bit easier! They’re available for Sportsters, 1990-97 Big Twins, and Shovelheads. Clutch tools designed specifically for use with the Barnett Scorpion line of clutches are also availble. Made in the US. Info: Barnett Tool & Engineering, 805/642-9435, BarnettClutches.com.

Barnett Clutch Kit – Harley Davidson XR1200

The Barnett clutch kit for the Harley Davidson XR1200 is made with their exclusive Carbon Fiber friction plates and tempered steel plates. The friction plates feature a ‘segmented’ design which increases oil flow and allows the plates to run cooler for longer life and smoother, more consistent performance. In addition, the Carbon Fiber friction material has a very high tolerance for heat making it an ideal choice for street or track. This kit includes all eight friction plates and seven steel plates. Made in the USA.

www.barnettclutches.com

New Barnett 2.25” Scorpion Harley Belt Drives

The newest addition to our Scorpion line of primary components is our 2.25” belt drives. What makes these belt drives unique is that they are available in five different drive ratios- stock, 5% underdrive, 10% underdrive, 8% overdrive and 12% overdrive. This allows you to raise or lower your RPM (measured at 65 mph), if desired, and can be changed at any time by simply changing the pulley and belt. These new belt drives come with your choice of the proven Scorpion lock-up or non lock-up clutch and are also available in black anodize or polished.

Available for 1990-06 FLH, 1990-05 Dyna, 1990-06 Softail, and 1990-00 FXR.

Made in the U.S.A.- Since 1948.

Barnett Tool & Engineering

2238 Palma Dr.
Ventura, CA 93003
Ph- 805-642-9435
www.barnettclutches.com