Küryakyn ECE-Approved Torpedo L.E.D. Lights

Hit the mark on style and functionality with Küryakyn’s all-new Torpedo L.E.D. Indicator and Run-Turn-Brake Lights for all Universal 12v Applications.

The streamlined torpedo-shaped housing measures in at 70mm long with a 45mm diameter (2.75” x 1.75”), and comes in two versions. Single-function amber versions are designed to serve as turn-signal indicators either up front or on the rear. Multi-function versions are designed for rear use only and feature three independent red and amber circuits that allow the units to be used as run-turn-brake lights for increased visibility.

All Torpedo sets are available in chrome or matte black finishes with clear lenses and utilize M10-1.5mm x 25mm mounting studs for easy installation.

Rear Torpedo L.E.D. Lights
• P/N 2509: Matte Black Torpedo Run-Turn-Brake – $99.99
• P/N 2507:Chrome Torpedo Run-Turn-Brake – $99.99

Front or Rear Torpedo L.E.D. Lights
• P/N 2510: Matte Black Torpedo Indicator Turn Lights – $99.99
• P/N 2508: Chrome Torpedo Indicator Turn Lights – $99.99

Some applications may require separate purchase of a load equalizer. For more information, visit www.kuryakyn.com.

Super Bright LEDs Motorcycle Accent Lightin

7-36-5-ALMAvailable in three-, four-, and six-LED versions with black plastic housings or low-profile chrome, Super Bright LEDs introduces ALM series light modules for motorcycle accent lighting. The ALM series (with a variety of colors and styles) offers vibration resistance, up to 10,000 hours of life, and low power draw. From $4.95. Info: Super Bright LEDs, 866/590-3533, SuperBrightLEDs.com.

Trask Performance motorcycle chin spoilers

7-36-1-TraskFor 2009 to present baggers, Trask Performance has released chin spoilers to cover up the lower frame area of your bike, adding a bit of custom style. Able to fit with or without an oil cooler, these spoilers are primed and ready to paint, and come with all the necessary hardware to mount to your bike. $279.95. Info: Trask Performance, 866/998-7275, TraskPerformance.com.

Performance Machine’s New Super Gas Merc Motorcycle Air Cleaner

PM-air-cleanerPerformance Machine’s new Super Gas Merc air cleaner cruises firmly into nostalgia territory, adding some hot rod flair to the styling of PM’s original Super Gas air cleaner. With clean lines and more curves than a pinup, this piece features ribbed concentric circles and the Performance Machine logo machined into the center. Equipped with a K&N air filter, the Merc offers optimal airflow and more horsepower than the stock alternative. This gorgeous air cleaner is CNC-machined from billet aluminum with built-in crank case breathers featuring chrome hardware and is available in chrome, contrast-cut, and the Black Ops finish. $419.95. Info: PerformanceMachine.com, 800/479-4037, PerformanceMachine.com.

Motorcycle Accent Lighting

SuperbrightALM series light modules for motorcycle accent lighting are now available. These units are available in three-, four-, and six-LED versions with low-profile chrome or black plastic housings. They’re perfect for motorcycle applications due to their low power draw, vibration resistance, and lifetimes of up to 10,000 hours. Info: SuperbrightLEDs.com.

D&D Performance Enterprises’ Custom Motorcycle Exhaust Pipe

D-and-DD&D Performance Enterprises’ custom Bobcat pipe is designed for 2000 and later Harley-Davidson Softails. It’s available in Midnight Black or show-quality chrome with a choice of polished aluminum, black, or carbon sleeve. By adding a high-flow air cleaner, enthusiasts will experience as much as a 10 percent gain in torque and horsepower across the entire rpm range. Info: D&D Performance, 817/834-8961, DAndDExhaust.com.

D&L Harley Gas Cap Using Your Own Artwork

D&L-gas-capsD&L DerbyCappers presents the newest addition to its collection: the Gas Capper. Using your own artwork or D&L’s thousands of stock images, the art is put on using UV inks or engraved, depending on what you want to have done. D&L clearcoats each Capper, and guarantees them for life against fading. This part is installed over your stock gas cap. Info: D&L DerbyCappers, 401/421-7558, DLDerbyCappers.com.

Accutronix brass, knurled, grooved, dual-cable motorcycle handlebar grips

Accutronix-pegsAccutronix has added brass, knurled, grooved, dual-cable handlebar grips to its line of products. These new grips will make for a great finish to your bike. They, along with all Accutronix products, are manufactured in Phoenix from solid alloy 360 brass. They fit 1982 and later 1″ handlebars and have a nylon throttle sleeve for smooth operation. Info: Accutronix, Accutronix.com.

Headwinds Fork-Mounted Spotlight Kit For The FLH

Headwinds introduces its fork-mounted spotlight kit for the FLH that increases rider visibility by providing a triangle of light and a greater visual footprint for traffic to see. Easy to install, Headwinds’ kit features 2″, 35W halogen spotlights, brackets, and hardware, and EZ Plug wiring for a quick hookup. The spotlights are made to match Headwinds bezels and turn signals but will complement other stock or aftermarket trim rings. Made by Headwinds in the US, spotlights are available in all finishes. Info: Headwinds, 626/359-8044, Headwinds.com.

Story as published in the september issue of American Iron Magazine.

Custom Cycle Engineering’s New Mortorcycle Fork Truss

Custom Cycle Engineering’s new fork truss is truly a performance part due to the dramatic improvement in front end handling. The engineering design and sleek styling are obvious characteristics in this part. The compound arc, which sweeps upward and rearward simultaneously, imparts greater resistance to deflection, twisting, and bending of the fork. The addition of large holes spaced out to a maximum-strength calculation keeps unsprung weight to a minimum. These trusses bolt securely to the lower sliders. Now available in 49mm. Info: Custom Cycle Engineering, 800/472-9253, CustomCycleEngineering.com.

Story as published in the september issue of American Iron Magazine.