Harley Product News From Drag Specialties


Look no further for the right battery for your early model Harley-Davidson . Drag Specialties has a line of conventional batteries that are built to the same exacting specifications and quality-control standards as OEM batteries, yet provide more cranking power for your 48-84 classic. Drag Specialties conventional battery kits also have a lead calcium alloy design that reduces water loss and service by 66% compared to standard batteries.

To ensure a longer life, each battery includes an anti-sulfation chemical formulated to reduce sulfate crystal buildup on the battery plates, plus fiberglass separators to improve acid flow. Each kit includes a Drag Specialties battery, pre-measured acid pack, filler tube, hardware kit and vent tube. As an added feature, each battery kit includes a quick-disconnect harness specifically designed for Drag Specialties chargers

For more information, go to www.dragspecialties.com or contact your local Drag Specialties dealer.


You won’t find a clamp that is more versatile than the Drag Specialties stainless steel worm clamp. These clamps feature a narrow design with a low-profile head to fit into tight spaces, making it much easer to attach and tighten them. The incredibly tough stainless steel construction is perfect for extreme temps or conditions, like securing exhaust pipes or exhaust heat wraps. There are two handy sizes available: 1.25″-2.25″ diameter and 2.25″-3.25″ diameter. The Drag Specialties stainless steel worm clamps are sold in packs of four. Proudly made in the U.S.A.

For more information, go to www.dragspecialties.com or contact your local Drag Specialties dealer.


Looking to add a new wrinkle to your bike’s look? Try one of these Drag Specialties billet aluminum pop-up gas caps with a black wrinkle finish. The gas cap screws into the OEM tank with a fit that is nearly flush when closed. Each cap opens easily with just a quarter-turn of the cap center. Both vented and non-vent styles are available to fit early and late-model OEM gas tanks with screw-in style gas caps.

For more information, go to www.dragspecialties.com or contact your local Drag Specialties dealer.


Great for high-temperature areas near the engine or exhaust, these cable ties are handy and versatile. Each one features a ball bearing and barb fastening assembly that locks tightly and will not slip. The sturdy stainless steel construction resists rust and is tough enough to be the right choice to secure any place an extra strength tie is needed. Drag Specialties stainless steel cable ties come in 8″ or 14″ lengths and are sold in packs of five. Proudly made in
the U.S.A.

For more information, go to www.dragspecialties.com or contact your local Drag Specialties dealer.


The innovations continue at Drag Specialties Seats. Known for such technological advances as solar-reflective leather, Drag Specialties Seats pulls another first with “The Convertible” backrest with built-in seat cover.

“The Convertible” is a complete backrest and pouch assembly that has a seat rain cover that pulls out of the pouch and covers the seat in a moment’s notice. The rain cover is secured in the pouch by two snaps and can be removed for cleaning or to use the oversized pouch for additional storage.

It’s as easy to use as one, two, three: simply lay the backrest pad forward, unzip the pouch, remove the rain cover and pull it around the perimeter of the seat to secure around the sides for added protection against sun, rain and mildew.

As comfortable as it is useful, the backrest pad features solar-reflective leather on contact areas, while pouch and pad sides are high-quality automotive-grade vinyl. Rain-resistant cover is made of high-quality 300 x 300 denier polyester fabric with a urethane coating that’s water- and mildew-resistant. All exposed hardware is polished with a show-chrome finish and the internal base is sturdy 14 gauge steel.

For added convenience, the backrest can be used in driver or passenger position and adjusts 2″ fore/aft and 2″ vertically (in three positions). Pad measures 10″ W x 7 1/2″ and is available for all Drag Specialties Double Bucket or Low Profile Touring Seats with EZ Glide I and EZ Glide II systems. Made in the U.S.A.

For more information, go to www.dragspecialties.com or contact your local Drag Specialties dealer.


Drag Specialties Seats offers the same world-class comfort for your custom ride as they do for stock Harleys. That’s why they are now offering these large low profile spring solo seats. Each one is constructed of comfortable high-density closed-cell foam that is covered with black solar-reflective leather or distressed brown leather. The advantage of solar reflective leather is that it reduces the seating surface temperature by as much as 25°F for a cooler seat, higher durability and longer life over conventional leather or vinyl. Underneath, a sturdy sixteen-gauge steel pan and 1″ x 3/16″ welded center bar support you comfortably. The rear of the seat features two rear screw studs for springs (sold separately). Measure 15 1/2″ L x 13″ W x 3/8″ H. Proudly made in the U.S.A.

For more information, go to www.dragspecialties.com or contact your local Drag Specialties dealer.

Mustang Tripper Fastback for Harley Baggers

Look for more coverage in the new Harley magazine for baggers – Motorcycle Bagger. Mustang’s one-piece Tripper FastbackTM design offers a super clean, custom style.

Cut low and sleek, this seat provides good back support for the driver.  Smoothly tapered in the back, the Tripper FastbackTM still gives passenger comfort for “tripping” around town.

Mustang’s One-Piece Tripper FastbackTM is priced right at only $339; models are available to fit Road King, FLHT, FLHX and FLTR 1997-up.

Mustang offers a full line of replacements seats for Harley-Davidson® and Metric Cruisers, all proudly handcrafted in the USA.

www.MustangSeats.com or call 800-243-1392.

Visit www.MotorcycleBagger.com if you like Harley baggers.

Harley Magazine Quality C&C Motorcycle Seats

C&C Motorcycle Seats specializes in quality hand crafted motorcycle seats for stock replacement and custom applications, featuring a wide choice of leathers, fabrics, colors and stitch patterns. C&C Seats also offer a full range of services including seat repair, reupholstery, raising or lowering the seat foam height and adding comfortable gel inserts for increased riding comfort and better bike control.

Visit at : www.SideRoadCycles.com

C&C 2Up Seat for HD Dyna

C&C Motorcycle Seats has just introduced its new 2Up Seats for Harley-Davidson’s popular Dyna Glide models. Shown here is the  C&C SportTour with a Removable Driver’s Backrest, with the seat lowering the driver for better bike control. An optional  9-inch high  Passenger Pad is also available. You can customize all CC Seats in a variety of available stitch patterns with your choice of thread color to accent paint or graphics. Along with the popular Vinyl fabric coverings  available in Black, Colors and Textures, you can also customize with Exotic Hides including Alligator and Ostrich. Your own special design embroidery can be followed. MSRP starts from $485.00

C&C Motorcycle Seats offers custom seat designs for both Stock Replacement and Special Construction motorcycles.  They also provide Seat Repair and ReUpholstery in Vinyl and Leather for all motorcycle brands and applications. Visit their website for a complete look at their available fabrics, leathers and embroidery designs.

Call: 866 775-2100 / 562 531-6185

Visit: www.CCseats.com


Founded in the 70’s by legendary seat designer and craftsman, Bob Le Pera, the company by his name is digging the “throw back” styles of today’s custom bikes.  Bobbed, Chopped, flat colors, pinstripping, all of these design cues are at the essence of what a custom bike used to be. Le Pera’s love of and involvement in those “early days” can be seen clearly in their new HOT ROD SERIES. The latest, very cool, styles feature simple, bitchin’ designs that are available on any number of their seat styles. Shown here from left to right, the DADDY O’, OL’ 32, AVANTI and BEL-AIR, will truly capture the soul of your Harley or custom ride. Be sure to catch these style, options, and the entire Le Pera line at www.lepera.com.

Mustang Seats New Website

Mustang Seats has a new website – check it out

Great site – updated shopping cart and a great blog following Mustang around the country. Worth Checking out.